ACU-150 Actuator Control Unit

595.00 ex. VAT 19%

NEW ACU-150

Supported Drives: Type-1 Hydraulic Drive Unit

The Raymarine ACU-150 is a component of the Evolution™ Autopilot system and is designed to provide power and control to a Raymarine Type-1 Hydraulic Drive Unit (M81120.)
The ACU-150 connects to the SeaTalk ng network for communication with its other peripherals. It works on 12-volt DC systems only.

Evolution Autopilot

EVOLUTION AI™ – AUTOPILOT INTELLIGENCE

Our Evolution autopilot systems perceive their environment and instantly calculate and evolve steering commands to maximize performance. The result is precise and confident course keeping, regardless of vessel speed or sea conditions – Evolution autopilots steer so accurately they can save fuel and get you to your destination faster.

Evolution Autopilots
A New Level of Autopilot Control

Race, cruise or fish – Evolution will take command
No fuss, easy to install and robust – the Evolution autopilot combines Raymarine’s autopilot expertise, FLIR Systems’ R&D, and advanced aerospace guidance technology to create Evolution Ai control algorithms that deliver a new level of accurate autopilot control.

Key Features
• Automagic™ – No lengthy calibration procedures to perform. No compass calibration required. Plug and play connections.
• Easy to install – Freedom from the restrictions of conventional heading sensors. EV sensor core can be installed above or below deck. Install upside-down or off the vessel’s centre line.
• Aerospace technology – 9-axis precision monitoring of pitch, roll, yaw and heading.
• Fuel efficient – Evolution autopilots steer so accurately they will save fuel and get you to your destination faster.

Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalk ng bus.

Ordering Information

ACU-150 Actuator Control Unit

Part No. Description Price ex. VAT 19%
E70430 ACU-150 Actuator Control Unit € 595.00

Specifications

General specifications
Nominal power supply 12 V
Operating voltage range 10.8 V to 15.6 V dc
Drive current output Maximum continuous 12 A at supply voltage
Drive clutch output No clutch connection
Connections Rudder reference sensor, Power, Drive motor, Ground
Power consumption (standby) main power supply 300 mA (12 V)
Power consumption (standby) SeaTalk ng power supply No power supply to SeaTalk ng
SeaTalk ng LEN (Load Equivalency Number) 1
SeaTalk ng power out No power supply to SeaTalk ng
Data connections SeaTalk ng
Installation environment Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF)
Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF)
Relative humidity: max 93%
Waterproof rating Connector panel – IPX2, Drive electronics – IPX6
Weight 0.6 kg (1.32 lbs)
Conformance Europe: 2004/108/EC
Australia and New Zealand: C-Tick, Compliance Level 2