iTC-5 Instrument Transducer Converter

€325.00 ex. VAT 19%

The iTC-5 seamlessly converts analog transducer signals to digital SeaTalkNG data, enabling easy integration of depth, speed, wind, and other sensors into modern Raymarine instrument systems. Compact, reliable, and simple to install for any marine setup.

iTC-5 Instrument Transducer Converter Features

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng.

Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

Extended STng systems can support multiple iTC-5 units.

SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.

Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).

If you don’t have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducer

ORDERING INFROMATION

 

ITC-5 INSTRUMENT TRANSDUCER CONVERTER
E70010 iTC-5 Instrument Transducer Converter € 325,00

SPECIFICATIONS

GENERAL SPECIFICATIONS
Product Number E70010
Nominal supply voltage 12 V dc
Operating voltage range 9 – 16 V dc
Current <150 mA peak operating current
Power consumption Typical: 1.5 W
Environmental Installation environment:
Operating temperature = -15ºC to +55ºC
Storage temperature = -25ºC to +70ºC
Relative humidity: max 95% Splash proof to IPX2
Data connections SeaTalkng backbone
1 x SeaTalkng spur
5 x transducer connections with spade terminals
Conformance Europe: 2004/108/EC
Australia and New Zealand: C-Tick Compliance Level 2
Category: